The decor of the semolina bottle is so simple in execution that even a child can cope with the task. By the way, such a decor process will help you keep your child busy for a long time, children love to swarm in bulk materials, and with what interest they watch grains of semolina stick to the surface of the jar - it's hard to put into words! But decorating a vase with semolina is not just child's play, but a full-fledged way to create an exclusive decorative item with your own hands, which will bring a piece of your warmth and soul to the interior of a house or apartment.

What you need for work:

• Bowl with semolina;
• Bottle without labels;
• PVA glue;
• Polymer glue or Moment;
• Rhinestones and rivets for decoration.

Master class - bottle decor with semolina.

> On the clean surface of the bottle we apply a pattern with PVA glue. For these purposes, it is better to purchase PVA glue in a bottle with a pointed nose, if you couldn’t find one, take a disposable syringe, pour glue into it, and use it to apply a pattern on the glass surface. The design of the pattern can be absolutely anything, we did the following, we drew wavy lines obliquely along the bottle, which we then crossed with the same wavy lines. The result was a kind of "fishing net". Don't be afraid to experiment, if you don't like the drawing, rinse the bottle under water, wipe it dry, and draw again, and so on until you are satisfied with the result.

> We take a handful of semolina and generously sprinkle the pattern on top, sprinkle should be with the bottle horizontal, then raise the bottle to a vertical position - the extra semolina should crumble, if the extra grains still remain on the surface of the product, just gently blow on the future vase, the extra the particles will have to fall off. Do not forget to decorate the neck of the bottle, cover it abundantly with a layer of PVA glue and sprinkle with semolina.

> We leave the vase to completely dry the PVA glue for about a day. After the glue has completely dried, wipe the gaps between the patterns with a napkin.

> We decorate the vase with rhinestones and decorative rivets (you can buy it in sewing shops). At the end, we tie a cord with decorative bell tips to the neck of the bottle.

> As a result of all the manipulations, such a pretty vase is obtained.

As you can see, the decor of the bottle with semolina is quite simple in execution, the process of applying the pattern can be considered the most difficult, and the longest is the drying time of the product. But the result was worth it, such a cute, exclusive vase simply cannot but rejoice. We also recommend that you try to decorate the vase with semolina on your own, we assure you that this process is very exciting.

After the holidays, and especially after the New Year, do not take empty glass containers. Every now and then you only have time to take out the garbage - glass bottles from champagne, wine and other strong drinks. Have you ever heard of manga? We suggest not to rush to get rid of glass containers. Take a closer look at the bottle, maybe it has a chance for a second life! An ordinary empty glass bottle in an instant turns into an elegant souvenir. With the help of available materials and simple tools, the bottle is transformed into such a pretty product that can be safely called a work of art.

So, to make such a souvenir you will need:

• disposable syringe
• aerosol varnish
• semolina
• PVA glue
• bottle
• rhinestones

Getting Started:

1. Wash the bottle with soap and dry thoroughly.

It is much more convenient to apply glue with a syringe than with a brush - there is a risk that the semolina will stick in a very thin layer or not stick at all.

2. Take a syringe without a needle and draw PVA glue into it.

3. Using a syringe, apply an ornament to the bottle and sprinkle it thickly with cereals. Work should be carried out with interruptions of 3-5 hours, that is, in several stages to dry the decorative bottle in a horizontal position.

4. Blow off the semolina in the gaps between the glue.

5. Coat the bottle with several coats of spray varnish.

6. Glue the rhinestones.

To create a pattern or pattern on the bottle, you can use a stencil, it can be easily found on the Internet. Print and transfer the pattern to a waterproof base, such as oilcloth. Cut out and attach the stencil to the bottle. Stick with masking tape. Apply PVA glue about two millimeters thick to the stencil, and pour semolina thickly on top. The glue should be thick enough - only then it will not leak under the stencil. Do not remove the stencil immediately.

Bottle decoration- a creative process, a worthy occupation for craftswomen and dreamers!

A beautiful and original bottle is always a pleasure to put on the table. We suggest you try to turn a simple glass bottle into a souvenir craft using an ordinary and familiar semolina.

So what we need:

• Semolina;
• PVA glue;
• disposable syringe;
• aerosol varnish;
• bottle.

First of all, wash the bottle with soap and wipe it dry. In a syringe (without a needle) we collect glue. Here it is worth stopping and saying a few words about glue. PVA glue is my favorite and most versatile. It is used in almost all products where there is a need. You can also use "liquid nails", but this glue has a very strong smell and gets your hands dirty. From experience, PVA glue of a thick consistency, like jelly, is most suitable for decoration - it does not flow. And it is much more convenient to apply it with a syringe than with a brush, because there is a risk that the semolina will not stick or stick in a very thin layer.

We draw an ornament with a syringe and sprinkle it thickly with cereals. The work is carried out in several stages, with breaks of 3-5 hours to dry the bottle in a horizontal position. The next step is to blow off the semolina in the gaps between the glue with a light fresh breath. We cover the bottle with several layers of aerosol varnish.

I want to show you how you can make decoupage with semolina. From such a bottle you can make a simple bottle decoration for the kitchen.

I think that many will like the bottle as a gift. Such a handmade souvenir will delight your loved ones and relatives for a long time.

We will need:

bottle;
PVA glue;
acrylic white primer;
white acrylic paint;
black acrylic paint;
paralon for smacking;
semolina;
napkin;
peas;
lentils;
white mesh;
yellow mesh.

1. First, wash the bottle and remove the labels from it. Next, wipe and degrease the surface of the bottle with acetone or alcohol.

2. We cover the bottle with a white acrylic primer, smacking it with foam. We dry.

For greater whiteness of the bottle - repeat again.

3. With PVA glue diluted with water 50/50, glue the motifs cut out of the napkin (only the top layer).

4. Carefully coat with glue (already undiluted) the places where there will be a different texture on the bottle, and sprinkle with our material, that is, semolina. We add more cereals. If the semolina accidentally got into the pictures, we immediately remove it. Gently shake off the excess cereal.

After drying, repeat again.

5. We take white acrylic paint and apply it on the semolina with chocking movements. We dry.

6. Paint the bottom of the bottle and partially the neck with black acrylic paint.

8. Apply varnish 2 times with drying between layers.

9. On the side of the bottle on the semolina, glue the halves of peas and lentils. Here the glue will need a glue-sealant or a glue gun or a glue-moment.